Forklift | Platforms | Attachments | F Endorsement

Forklift Type Key

 SDROCB (battery/electric)  Sitdown Ride-On Counterbalance  SDROCB (internal combustion)  Sitdown Ride-On Counterbalance
 SDROCB (dual tyres)  Sitdown Ride-On Counterbalance  SP  Stockpicker
 ESR  European Style Reach Truck  ST/SX  Walkie Straddle Stacker
 GPW(W)  General Purpse Walkie  SUROCB (RC)  Stand Up Ride-On Counterbalance

 RD

 Ride-On Reach Truck (double deep)  TR  Tow Tractor
 RM  Ride-On Rach Truck (mono mast)  WS  Walkie Stacker
 RPT  Ride-On Pallet Truck  WALKIE M  Walk Behind M Series
 RR  Ride-On Reach Truck (stand up)  WAV  Work Assist Vehicle
 SC  Sitdown Counterbalance (single rear wheel)  WP Walkie Pallet Truck 
 SHR  Walkie Straddle Stacker Heavy Duty  WR  Walkie Reach

Courses

SDROCB Forklift Operator's Certificate only

This course is designed to produce operators who can operate a forklift in a safe, efficient and legal maner, along with improving your operating technique and awareness of the safety and mechanical implications of forklift operation. This is formal training that meets the requirements of HSWA and Worksafe. The learner, standard and refresher courses require renewal every three (3) years. No unit standards apply to these courses but you can choose to have them applied for an additional cost.

Learners - if you have never operated a forklift before - $290 incl. GST

Standard - if you have basic operator skills but do not hold a current operators certificate - $230 incl. GST

Refresher - if you hold a current operators certificate (or it has not expired by more than 3 months) - $160 incl. GST

Forklift Operator's Certificate Unit Standard 10851 - if you would like to apply Unit Standard 10851 'Operate a powered industrial lift truck fitted with forks' against your NZQA Record of Learning - $45 incl. GST

F Endorsement only

This NZ Transport Agency Approved F (Forklift) Licence Endorsement course is for anyone who operates a forklift on a road, or in an area that is defined as a road. The course aim is to provide an operator with the skills and knowledge to operate a forklift safely and legally on a road in any applicable environment. Operators must have a valid full NZ class 1 drivers licence. Unit standard 18496 'Demonstrate knowledge and skills for driving a forklift on a road for endorsement F (forklifts)' is covered in this course and applied against your NZQA Record of Learning.

F endorsement - $170 incl. GST

SDROCB Forklift Operator's Certificate + F Endorsement combination

Learners + F Endorsement - $350 incl. GST

Standard + F Endorsement - $290 incl. GST

Refresher + F Endorsement - $230 incl. GST

COMBINATION Training

Any two forklift types (see list above) - onsite only - trainer travel fee may apply

Under HSWA operators are required to be trained and competent in the operation of the machinery they use. There are many different types of forklifts, and being trained and compentent in the operation of a CDROCB does not mean that the operator will know the first thing about how to operate a WS (walker stacker). Be ahead of the game and ensure that your staff are trained and competent in all the machinery they are required to operate while employed with you. We offer combination training as follows:

For any two types:

Learners - if you have never operated forklift type - $290 incl. GST

Standard - if you have basic operator skills but do not hold a current operators certificate for that forklift type - $230 incl. GST

Refresher - if you hold a current operators certificate for that forklift type - $160 incl. GST

For every additional type over and above 2

$50 incl. GST 

Let's take a look at an example:

Joe wants to train his new employee Maree on four different types of forklift. She used them at her last job but she only holds a SDROCB licence which is due to expire in a month. Joe wants to meet his HSWA obligations and ensure Maree is trained and competent on all the machines she is required to use while working for him and books her training with FIT. His invoice would look like this:

Combination Training (2 types of forklift) - SDROCB + WALKIE M  $230 incl GST

Additional (2 types of forklift) - WR + SUROCB $100 incl GST

Total invoice for Maree's training would be $330 incl GST (no trainer travel fee would apply as the onsite training was at a local business in Hamilton, and this where we are located).

SDROCB Platform only

This course is designed to produce operators who have a sound understanding of how to use a forklift mounted safety platform and who can demonstrate safe operating practices in its use in the workplace. Operators must hold a current Operator's Certificate. Unit standard 18409 'Use a forklift mounted safety platform in the workplace' is covered in this course and applied against your NZQA Record of Learning.

Platform - $130 incl. GST

SDROCB Attachment only

This course is designed to produce operators who have a sound understanding of how to use a forklift fitted with attachments and who can demonstrate safe operating practices of there use in the workplace. Operators must hold a current Operator's Certificate. Unit standard 10852 'Operate a powered industrial lift truck (forklift) fitted with attachments' is covered in this course and applied against your NZQA Record of Learning.

Attachment - $130 incl. GST

NZQA Record of Learning - NSN number

If you do not have a NSN number we will apply for this on your behalf. There is an additional cost for this, currently $23 incl. GST. You can contact NZQA during business hours on 0800 697 296 to see if you have one prior to booking if you are unsure.

 

For any other training combination, or for any questions please do contact us.  we;d be happy to help.

© Copyright Forklift Industrial Training
Hamilton, New Zealand